Yealink VC800 - Page 122

Administrator’s Guide for Yealink VC800 Video Conferencing System
108
Parameter
Description
Configuration Method
H.323 systems are allowed to access
the gatekeeper.
Gatekeeper
Username
Specifies the user name for
authentication with gatekeeper.
Default: blank
Remote Control
Web User Interface
Gatekeeper
Password
Specifies the password for
authentication with gatekeeper.
Default: blank
Remote Control
Web User Interface
H.460 Active
Enables or disables firewall traversal
of H.323 calls using H.460 protocols.
Default: Disabled
For more information, refer to
Enabling H.460 Support for H.323
Calls on page 110.
Remote Control
Web User Interface
H.323 Tunneling
(Optional) Instructs the system to
send all signaling and media through
the HTTP tunnel.
Default: Disabled
For more information, refer to H.323
Tunneling on page 49.
Remote Control
Web User Interface
H.235
Specifies the H.235 type during an
H.323 call.
 Disabled—do not use H.235 in
H.323 calls.
 Optional—negotiate with the
far site whether to use H.235 for
media encryption in H.323 calls.
 Compulsory—compulsory use
H.235 for media encryption in
H.323 calls.
Default: Disabled
For more information, refer to H.235
on page 242.
Web User Interface
Protocol Monitor
Port
Specifies the port for the H.323
protocol.
Valid values: 0-65535
Default 1720.
Web User Interface