Yealink VC800 - Page 123

Configuring Call Preferences
109
Parameter
Description
Configuration Method
Note: It is only applicable to H.323 IP
call.
Local Early Media
Enables or disables local early media
feature on the system.
Default: Disabled.
If it is set to Enabled, the system will
send video SDP twice during a call to
solve the compatibility between
Yealink device and certain devices.
Web User Interface
To configure H.323 account via web user interface:
1. Click on Account->H.323.
2. Configure the H.323 account settings.
3. Click Confirm to accept the change.
After successful registration, the display device displays .
To configure H.323 account via the remote control:
1. Select More->Setting->Advanced (default password: 0000) ->H.323.
2. Configure the H.323 account settings.
3. Select Save, and then press to accept the change.
After successful registration, the display device displays .