Yealink VC800 - Page 218

Administrator’s Guide for Yealink VC800 Video Conferencing System
204
 Sweden
 Russia
 United States
Configured tones can be heard on the system for the following conditions:
Condition
Description
Ring Back
Ring-back tone
Busy
When the callee is busy
Call Waiting
Call waiting tone
Auto Answer
When answering a call automatically
Tones parameters on the system are described below:
Parameter
Description
Configuration Method
Select Country
Customizes tones or selects the
desired country tone set.
Default: Custom
Web User Interface
Ring Back
Customizes the ring-back tone for
the system.
tone = element1[,element2]
[,element3]…[,element8]
Where
element =
[!]Freq1[+Freq2][+Freq3][+Freq4]
/Duration
Freq: the frequency of the tone
(ranges from 200Hz to 7000 Hz). If it
is set to 0Hz, it means the tone is not
played. A tone consists of at most
four different frequencies.
Duration: the duration (in
milliseconds) of the dial tone, ranges
from 0 to 30000ms.
You can configure at most eight
different tones for one condition,
and separate them by commas. (e.g.,
250/200, 0/1000, 200+300/500,
600+700+800+1000/2000).
If you want the system to play tones
once, add an exclamation mark “!”
Web User Interface