Yealink VC800 - Page 219

Configuring System Settings
205
Parameter
Description
Configuration Method
before tones (e.g., !250/200, 0/1000,
200+300/500,
600+700+800+1000/2000).
Default: Blank
Note: It only works if the parameter
“Select Country” is set to Custom.
Busy
Customizes the busy tone for the
system.
For more information on how to
customize the tone, refer to the
parameter “Ring Back”.
Default: Blank
Note: It only works if the parameter
“Select Country” is set to Custom.
Web User Interface
Call Waiting
Customizes the call waiting tone for
the system.
For more information on how to
customize the tone, refer to the
parameter “Ring Back”.
Default: Blank
Note: It only works if the parameter
“Select Country” is set to Custom.
Web User Interface
Auto Answer
Customizes the auto answer tone for
the system.
For more information on how to
customize the tone, refer to the
parameter “Ring Back”.
Default: Blank
Note: It only works if the parameter
“Select Country” is set to Custom.
Web User Interface
To configure tones via web user interface:
1. Click on Setting->Tones.
2. Select the desired value from the pull-down list of Select Country.