Yealink VC800 - Setup Wizard

Administrator’s Guide for Yealink VC800 Video Conferencing System
30
Parameter
Description
Configuration Method
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Gateway
Configures the gateway assigned to
the system.
Default: Blank
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Remote Control
Web User Interface
Static DNS
Triggers the static DNS feature to on
or off.
Default: Off
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Remote Control
Web User Interface
Primary DNS
Configures the primary DNS server
assigned to the system.
Default: Blank
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Remote Control
Web User Interface
Secondary DNS
Configures the secondary DNS
server assigned to the system.
Default: Blank
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Remote Control
Web User Interface
To configure the IP address mode via web user interface:
1. Click on Network->LAN Configuration.