Yealink VC800 - Page 76

Administrator’s Guide for Yealink VC800 Video Conferencing System
62
Parameter
Description
Configuration Method
 Disabled
 STUN
 StaticNat
Default: Disabled
Note: Static NAT works only if this
parameter is set to StaticNat.
To configure STUN server via web user interface:
1. Click on Network->NAT/Firewall.
2. In the STUN Config block, select the desired value from the pull-down list of Active.
3. Enter the IP address or the domain name of the STUN server in the STUN Server field.
4. Enter the port of the STUN server in the STUN Port field.
5. Click Confirm to accept the change.
To configure STUN for SIP account via web user interface:
1. Click on Account->SIP Account.