Configuring Network
63
2. Select STUN from the pull-down list of NAT Traversal.
3. Click Confirm to accept the change.
To configure STUN for SIP IP call via web user interface:
1. Click on Account->SIP IP Call.
2. Select STUN from the pull-down list of NAT Traversal.
3. Click Confirm to accept the change.
To configure STUN server via the remote control:
1. Select More->Setting->Advanced (default password: 0000) ->NAT/Firewall.
Mark the ON radio box in the STUN Active field.
2. Enter the IP address or the domain name of the STUN server in the STUN Server field.
To Next Page
Loading...
