User Guide for the W56P IP DECT Phone
36
To configure the backlight via the handset:
1. Press to enter the main menu.
2. Select Settings->Display->Display Backlight.
3. Press or to select the desired value from the In Charger field.
4. Press or to select the desired value from the Out Of Charger field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
The screen saver of the handset is designed to protect your LCD screen by filling it with
an analog clock. You can enable the screen saver to protect the LCD screen if you do
not use your handset for a long time. When the screen saver is enabled, an analog clock
will be activated and appear on the LCD screen if the handset is idle for approximately
10 seconds.
To configure screen saver via the handset:
1. Press to enter the main menu.
2. Select Settings->Display->Screen Saver.
3. Press the Change soft key to check or uncheck the Screen Saver checkbox.
You can change the wallpaper image to display when the handset is idle.
To change the wallpaper via the handset:
1. Press to enter the main menu.
2. Select Settings->Display->Wallpaper.
3. Press or to select the desired image.
4. Press Save soft key to accept the change.
You can enable the keypad light to make the digital keys, # key, * key, TRAN key and
Mute key light up when any key is pressed. This helps you distinguish keys from each
other in a dark environment.
To configure keypad light via the handset:
1. Press to enter the main menu.
2. Select Settings->Display->Keypad Light.
3. Press the Change soft key to check or uncheck the Keypad Light checkbox.
To Next Page
Loading...
