User Guide for the W56P IP DECT Phone
58
3. Press or to highlight the desired line, and then press the OK soft key.
The default outgoing line is changed successfully.
After the handset is registered to the base station, you can assign one or more incoming
lines for the handset. The handset can only receive incoming calls of the assigned
incoming line(s). You can assign incoming lines to all handsets registered to the same
base station on your handset.
To assign the incoming line to handset via web user interface:
1. Click on Account->Number Assignment.
2. Check the desired account from Line No.&Name field to the corresponding handset
in the Handset No. field.
3. Click Confirm to save the change.
As the configuration shown above, you can do the following:
- For Line 1: Line 1 (1023) is assigned to Handset2. A call dial line 1 (1023) will be
received by Handset2.
- For Line 2: Line 2 (104) is assigned to Handset3. A call dial line 2 (104) will be
received by Handset3.
- For Line 3: Line 3 (1045) is assigned to Handset1 and Handset2. A call dial line 3
(1045) will be received by Handset1 and Handset2 at the same time. The handsets
ringing simultaneously, the incoming call can be only answered by one of them.
To Next Page
Loading...
