Call Features
83
To listen to the voice mail using the menu via the handset:
1. Press to enter the main menu.
2. Select Voice Mail->Play Message.
If you have not set the voice mail access code, it will enter the setting screen, you
should configure it first.
3. (Optional) Press or to highlight the desired line, and then press the Select
soft key.
4. The handset dials out the voice mail access code using the selected line
automatically.
Follow the voice prompt from the system server to listen to your voice mails.
To listen to the voice mail via fast access via the handset:
1. Long press when the handset is idle.
The handset automatically dials out the voice mail access code using the line you
selected when configuring fast access for voice mail.
If you have not set the voice mail access code, it will enter the setting screen, you
should configure it first.
2. Follow the voice prompt from the system server to listen to your voice mails.
You can also listen to the voice mail by pressing to enter the Messages & Calls
screen. Select the desired line and press the Select soft key.
Note
You can use Shared Call Appearance (SCA) feature to share an extension which can be
registered on two or more IP phones at the same time.
If two phones share a line, an incoming call to this extension will cause both phones to
ring simultaneously. The incoming call can be answered on either a phone but not both.
Before listening to the voice mails, make sure the voice mail access code has been
configured.
When all new voice mails are retrieved, the icon will disappear from the screen.
To Next Page
Loading...
