Yealink W56P User Manual

User Guide for the W56P IP DECT Phone
72
To un-mute a call:
1. Press again.
The icon disappears from the LCD screen.
You can place an active call on hold. At any time, at most one active call can be in
progress on your handset. You can answer or make another call while placing the
original call on hold.
To place a call on hold:
1. Press the Options soft key during a call, and then select Hold.
The call is placed on hold, and the icon is displayed on the LCD screen.
To resume a hold call:
Do one of the following:
- Press the Resume soft key.
- Press .
- Press .
Two calls on Hold:
If two calls are placed on hold on the handset, press the Resume soft key to resume the
current call. Press , or the Swap soft key to swap between two calls.
Note
You can enable or disable call waiting feature on the handset. If call waiting feature is
enable, the handset will notify you of a new incoming call during a call, and present the
incoming call information visually on the LCD screen. You can also enable the handset to
play a warning tone when receiving a new incoming call during a call. If call waiting
feature is disabled, the new incoming call will be automatically rejected by the handset.
When the call on the handset is placed on hold, placing the handset in the charger
cradle will not end the call.

Yealink W56P Specifications

General

Lines quantity	5 lines
Answering machine	Yes
Phonebook capacity	500 entries
Display diagonal	2.4 \
Display resolution	240 x 320 pixels
Standby time	400 h
Headset connectivity	3.5 mm
Ethernet LAN (RJ-45) ports	1
Voice codecs	CNG, G.711, G.711a, G.722, G.723, G.726, G.727, G.729, VAD, iLBC
Number of melodies	9
Volume control	Digital
Keypad number of keys	12
Number of function keys	6
Mounting	Desk/Wall
Handset type	Wireless handset
Product type	IP Phone
Product color	Black, Silver
Maximum indoor range	50 m
Maximum outdoor range	300 m
Dual-Tone Multi-Frequency (DTMF) modes	-
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Security algorithms	AES, MD5, SIPS, SRTP, SSL/TLS
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface type	Fast Ethernet
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Battery technology	Lithium

Weight and Dimensions

Weight	7800 g
Package depth	196 mm
Package width	203 mm
Package height	95 mm
Package weight	8700 g
Base dimensions	153.5 x 108.5 x 45 mm
Handset dimensions (WxDxH)	175 x 53 x 20.3 mm