Phone Settings
37
Date and time are displayed on the idle screen of your handset. The handset obtains
the date and time from the Simple Network Time Protocol (SNTP) server by default. If
your handset cannot obtain the date and time from the SNTP server, you need to
configure the date and time manually.
To configure date and time manually for all handsets via web user interface.
1. Click on Settings->Time & Date.
2. Select Enabled from the pull-down list of Manual Time.
3. Enter the time and date in the corresponding fields.
4. Click Confirm to accept the change.
To configure date and time manually for a specific handset:
1. Press to enter the main menu.
2. Select Settings->Date & Time.
3. Edit the desired value in the Date and Time field respectively.
4. Press the Save soft key to accept the change.
The date and time displayed on the LCD screen will change accordingly.
Note
Before you configure date and time manually for a specific handset, you should enable
the Manual Time via web user interface first, or it would not take effect.
To Next Page
Loading...
