Yealink W56P - Block out

Phone Settings
55
3. Enter the desired line ID in the Account field or leave it blank.
4. Click Confirm to accept the change.
Note
You can block some specific numbers (up to 10) from being dialed. When you dial the
block out number on the handset, the dialing will fail, and the LCD screen will prompt
“Forbidden”.
To add a block out number via web user interface via the handset:
1. Click on Settings->Dial Plan->Block Out.
2. Enter the desired value in the BlockOut Number field.
3. Enter the desired line ID in the Account field or leave it blank.
4. Click Confirm to add the block out number.
Note
The default values of minimum and maximum lengths are 1 and 15.
Area code is configurable via web user interface only.
Area code is applicable for all the handset registered to the base station.
Block out is configurable via web user interface only.
Block out is applicable for all the handset registered to the base station.