User Guide for the W56P IP DECT Phone
80
To configure anonymous call feature for a specific line via the handset:
1. Press to enter the main menu.
2. Select Call Features->Anonymous Call.
The LCD screen displays the outgoing lines currently assigned to the handset. The
default outgoing line is highlighted and followed by a left arrow.
3. Press or to highlight the desired line, and then press the OK soft key.
4. Press or to select the desired value from the Status field.
5. Press the OK soft key to accept the change.
To place an anonymous call:
1. Using the specific line on the handset to place a call.
The LCD screen of the destination phone prompts an incoming call from
anonymous.
Anonymous Call Code
You can configure the phone to send anonymous call on code/off code to
activate/deactivate the server-side anonymous call feature via web user interface.
Contact your system administrator for the anonymous call on code and off code.
To configure anonymous call code via web user interface:
1. Click on Account->Basic.
2. Select the desire account from the Account field.
3. Select desired value from the drop-down list of Send Anonymous code field.
4. Enter the anonymous call on code and off code in the On Code and Off Code field
respectively.
5. Click Confirm to accept the change.
You can use anonymous call rejection feature to reject incoming calls from anonymous
To Next Page
Loading...
