User Guide for the W56P IP DECT Phone
28
The base station supports up to 5 lines. You can register an account for each line via
web user interface.
To register an account via web user interface:
1. Click on Account->Register.
2. Select the desired account from the pull-down list of Account.
3. Select Enabled from the pull-down list of Line Active.
4. Enter the valid value in the Label, Display Name, Register Name, User Name,
Password and SIP Server1/2 field respectively.
5. If you use the outbound proxy servers, do the following:
Select Enabled from the pull-down list of Enable Outbound Proxy Server field.
Enter the desired value in the Outbound Proxy1/2 and Proxy Fallback Interval field
respectively.
Contact your system administrator for the account information.
6. Click Confirm to accept the change.
To Next Page
Loading...
