Yealink W56P - Page 74

User Guide for the W56P IP DECT Phone
60
You can assign a number in your directory (including local directory and remote phone
book) to the digit keys of your handset. This helps you dial a contact quickly and easily
by long pressing the speed dial key without having to enter the directory. The available
speed dial keys are the digit keys 2-9.
Note
To assign a speed dial number from the directory via the handset:
1. Press to enter the main menu.
2. Select Settings->Telephony->Speed Dial.
The LCD screen displays all available speed dial keys.
If the digit key did not be assigned numbers before, you can long press the digit key
when the phone is idle to enter the Speed Dial screen.
3. Press or to highlight the desired digit key, and then press the Assign soft key.
4. Press or to highlight the desired directory if there are multiple directories.
5. Select the desired contact from the directory.
6. Do one of the following:
- If only one number is stored for the contact in the selected directory, press the
OK soft key to assign the number to the selected speed dial key.
- If both the office number and the mobile number are stored for the contact in
the selected directory, press the OK soft key to display the two numbers.
Press or to highlight the desired number.
Press the OK soft key to assign the number to the selected speed dial key.
To change a speed dial number via the handset:
1. Press to enter the main menu.
2. Select Settings->Telephony->Speed Dial.
The LCD screen displays all available speed dial keys.
3. Press or to highlight the desired speed dial key, which is already assigned a
number.
4. Press the Options soft key and then select Change to change the assigned speed
dial number.
The assigned number should be existed in local directory (refer to Local Directory on
page 42) or remote phone book (refer to Remote Phone Book on page 46).