MyPBX Standard User Manual
www.yeastar.com Page 134
Figure 4-11
5*. Alert Settings
After enabling alert settings‟, if the device is attacked, the system will notify
users the alert via call or e-mail. The attack modes include IP attack and Web
Login.
5.1 IPATTACK
When the system is attacked by some IP addresses, the firewall will add the IP
to auto IP Blacklist and notify the user if it match the protection rule.
Example: Configure to notify extension 500, outbound number 5503301 and
E-mail alert@yeastar.com.
configuration could be as below.
Phone Notification Settings:
Phone Notification: Yes
Number: 500;5503301
Attempts: 1
Interval: 60s
Prompt: default
Note: If there‟s outbound number to notify, the number should be fit with the
dial pattern of outbound route.
E-mail Notification Settings:
To Next Page
Loading...
Need help?
General
