Yeastar Technology MyPBX U100 Administrator's Guide

MyPBX U100/U200 Administrator Guide
107/195
·Follow Me Prompt
When set “Follow me” to “Transfer to number” on the extension page (e.g. when
500 is busy, transfer to 501), while 500 is busy, the call will be transferred to
501. If “Enable Follow Me Prompt” choosing yes, there will be prompt before
transferring the call. Otherwise, the call will be transferred directly without any
prompt. Default: Yes.
·Music on Hold for Follow Me Prompt
Configure whether to play a prompt “please hold while I try to locate the person
you are calling” when transfer a call by follow me settings.
·Invalid Phone Number Prompt
Configure the prompt when the dialed phone number is invalid.
·Busy Line Prompt
Configure the prompt when the dialed phone number is busy.
·Dial Failure Prompt
Configure the prompt when dial failed due to conjunction no-available channel.
2) Web Server
·HTTP
Enable or disable HTTP session.
·HTTP Bind Port
Default port to use for HTTP session is 80.
·HTTPS
Enable or disable HTTPS session.
·HTTPS Bind Port
Default port to use for HTTPS session is 443.
Note: please reboot the system to take effect
3) Extension Preferences
·User Extensions
The default value is 500 to 616
·Ring Group Extensions
The default value is 620 to 629
·Paging Group Extensions

Yeastar Technology MyPBX U100 Specifications

General

Brand	Yeastar Technology
Model	MyPBX U100
Category	Telephone Accessories
Language	English