Yeastar Technology MyPBX U100 Administrator's Guide

MyPBX U100/U200 Administrator Guide
143/195
10.2 Incoming call
Sample Routing to an IVR
Let’s configure an incoming call to route to the IVR. In the IVR itself, let’s
configure digit 0 to route the call to extension 300, and digit 1 to route the call
to ringgroup.
1. Add IVR
To add a new IVR, go to IVR Create New IVR
Figure 10-4
2. Add Inbound Routes
As we can see from the Inbound Route of “VOIP_IN”, all incoming calls from
VOIP trunk will be sent to the IVR.

Yeastar Technology MyPBX U100 Specifications

General

Brand	Yeastar Technology
Model	MyPBX U100
Category	Telephone Accessories
Language	English