EasyManuals Logo

Yeastar Technology MyPBX U100 Administrator's Guide

Yeastar Technology MyPBX U100
195 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #127 background imageLoading...
Page #127 background image
MyPBX U100/U200 Administrator Guide
127/195
6.7.5 DNIS Settings
DNIS (Dialed Number Identification Service) is a telephone service that
identifies for the receiver of a call the number that the caller dialed
Figure 6-72
Note: If DID is not configured here, all the calls via this trunk will show the DNIS
instead of the original caller ID.
6.7.6 DISA
DISA (Direct Inward System Access) allows someone calling in from outside the
telephone switch (PBX) to obtain an “internal” system dial tone and make calls
as if they were using one of the extensions attached to the telephone switch. To
use DISA, a user calls a DISA number, which invokes the DISA application. The
DISA application in turn requires the user to enter a PIN number, followed by the
pound sign (#). If the PIN number is correct, the user will hear dial tone on
which a call may be placed. Obviously, this type of access has serious security
implications, and great care must be taken not to compromise your security.

Table of Contents

Other manuals for Yeastar Technology MyPBX U100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yeastar Technology MyPBX U100 and is the answer not in the manual?

Yeastar Technology MyPBX U100 Specifications

General IconGeneral
BrandYeastar Technology
ModelMyPBX U100
CategoryTelephone Accessories
LanguageEnglish