Yeastar Technology MyPBX U100 Administrator's Guide

MyPBX U100/U200 Administrator Guide
40/195
Figure 5-29
After enabling “user” account, you can log in MyPBX using “user”. “user”
account can change its own password.
CDR account:
“cdr” account is disabled by default and its default password is “password”. You
can enable it after you log in MyPBX using “admin” account.
To change the password, select “cdr” in “User”, enter the old password and new
password, and click “Save”. The system will then prompt you to re-login using
your new password.
After you enter the new password, MyPBX will prompt the password strength. It
is recommended that you use numbers, upper-case letters, and lower-case
letters to increase the security.
Figure 5-30
After enabling “cdr” account, you can log in MyPBX using “cdr”. “cdr” account
can change its own password.
5.5.2 Date and Time
Set the date and time for MyPBX.

Yeastar Technology MyPBX U100 Specifications

General

Brand	Yeastar Technology
Model	MyPBX U100
Category	Telephone Accessories
Language	English