Yeastar Technology MyPBX U100 Administrator's Guide

MyPBX U100/U200 Administrator Guide
30/195
There are two main types of messages on the Asterisk Manager Interface:
manager events and manager actions.
The 3
rd
party software can work with MyPBX using AMI interface. It is disabled
by default. If necessary, you can enable it.
Figure 5-16
Username & password: after enabling AMI, you can use this username and
password to log in MyPBX AMI.
IP Restriction: you can set which IP can log in MyPBX AMI interface.
5.2.5 Database Grant
U100&U200 are using MySQL database from 14.18.0.22. The 3
rd
party software
can access MySQL via internet. Before that, you need to grant the authority to
the database user.
After entering “Database Grant” page, clicking “Add”, you can add a database
user, set user password and grant authority.
Figure 5-17 Database Grant
Username/password: The 3
rd
party can use this username and password to
access the MySQL.
Database: there are 2 options, CDR and Record. If you choose CDR, then this
user has authority to check CDR database; if you choose Record, then the user
has authority to check which call has been recorded automatically.

Yeastar Technology MyPBX U100 Specifications

General

Brand	Yeastar Technology
Model	MyPBX U100
Category	Telephone Accessories
Language	English