MyPBX U100/U200 Administrator Guide
135/195
·Email Address
This email address will be used to:
1. Send email to the addresses listed on “SMS to Email” setting.
2. Receive email and send the text of the email to the target mobile number by
SMS.
Note: If you use Gmail, just put your user name here. E.g. email address:
test@gmail.com, you just put “test” here.
·Password
Input the password of this email here.
·SMTP Server (SMTP)
·SMTP Server Port
·Receive Server (POP3)
·Receive Server Port
If you want to know more about Email to SMS, please refer to APPENDIX F
6.7.10 Certificates
MyPBX can support TLS extension. Before you register TLS extension on IP
phone, you should upload certificates first.
Figure 6-84
Trusted Certificate
This certificate is a CA certificate. When selecting “TLS Verify Client” as “Yes”,
you should upload a CA. The relevant IP phone should also have this certificate.
PBX Certificate
This certificate is server certificate. No matter selecting “TLS Verify Client”
as “Yes” or “NO”, you should upload this certificate to MyPBX. If IP phone
enables “TLS Verify server”, you should also upload this certificate on IP phone.
To Next Page
Loading...
Need help?
General
