Yeastar Technology MyPBX U100 Administrator's Guide

MyPBX U100/U200 Administrator Guide
134/195
2) Enable Email to SMS
If you enable this, you can use MyPBX to send out message by sending an email
to the specified address.
Figure 6-82
·Enable Country Code
If you want to add country code before the dialed numbers, please tick this.
·Country Code
If you enable country code, the country code will be added before the numbers
which you want to send SMS. Also you can use a custom country code, which
makes it more flexible.
·Receive mails every
The interval time of receiving mails from POP3 server.
·Access Code
This PIN code is used to verify the subject of the emails received. If the form of
email passes the verification, it will be send out by SIM card. If not, this email
will be deleted immediately.
3) Email Settings
Figure 6-83
Note:
1. If you want to use “SMS to Email”, please configure POP3 setting.
2. If you configure the POP3 setting, MyPBX will download emails from the mail
server regularly. Once downloaded, the emails will be deleted from the mail
server.

Yeastar Technology MyPBX U100 Specifications

General

Brand	Yeastar Technology
Model	MyPBX U100
Category	Telephone Accessories
Language	English