MyPBX U100/U200 Administrator Guide
157/195
Oceania, is a feature offered by telephone companies for use with their
customers' private branch exchange (PBX) systems. In DID service the
telephone company provides one or more trunk lines to the customer for
connection to the customer's PBX and allocates a range of telephone numbers to
this line (or group of lines) and forwards all calls to such numbers via the trunk.
MyPBX support DID, you can configure DID in inbound route. Related settings:
DID Number, Extension, Destination.
Figure G-1
·DID Number
Define the expected DID Number if this trunk passes DID on incoming calls.
Leave this field blank to match calls with any or no DID info. Only service
provider, E1 trunks, BRI trunks or SIP trunks need to be configured with this
setting.
You can also use pattern matching to match a range of numbers. The following
patterns may be used:
X: Any Digit from 0-9
Z: Any Digit from 1-9
N: Any Digit from 2-9
[12345-9]: Any digit in the brackets (in this example, 1, 2, 3, 4, 5, 6, 7, 8, 9)
The “.” Character will match any remaining digits. For example, “9011.” will
match any phone number that starts with “9011”, excluding “9011” itself.
The “!” will match none remaining digits, and causes the matching process to
complete as soon as it can be determined that no other matches are possible.
To Next Page
Loading...
Need help?
General
