EasyManuals Logo

Yeastar Technology MyPBX U100 Administrator's Guide

Yeastar Technology MyPBX U100
195 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
MyPBX U100/U200 Administrator Guide
27/195
Figure 5-12
·Name
A name for this rule, e.g. “HTTP”.
·Description
Simple description for this rule. E.g. Accept the specific host to access the web
interface for configuration.
·Protocol
The protocols for this rule.
·Port
Initial port should be on the left and end port should be on the right.
The end port must be equal to or greater than start port.
·IP
The IP address for this rule. The format of IP address is: IP/mask
E.g. 192.168.5.100/255.255.255.255 for IP 192.168.5.100
E.g.216.207.245.47/255.255.255.255 for IP 216.207.245.47
E.g.192.168.5.0/255.255.255.0 for IP from 192.168.5.0 to 192.168.5.255.
·MAC Address
The format of MAC Address is XX:XX:XX:XX:XX:XX, X means 0~9 or A~F in hex,
the A~F are not case sensitive.
Note: The MAC address will be changed when it’s a remote device, so it will
not be working to filter using MAC for remote devices.
·Action
Accept: Accept the access from remote hosts.
Drop: Drop the access from remote hosts.
Ignore: Ignore the access.

Table of Contents

Other manuals for Yeastar Technology MyPBX U100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yeastar Technology MyPBX U100 and is the answer not in the manual?

Yeastar Technology MyPBX U100 Specifications

General IconGeneral
BrandYeastar Technology
ModelMyPBX U100
CategoryTelephone Accessories
LanguageEnglish