MyPBX U100/U200 Administrator Guide
32/195
Whether enable E-mail Notification or not
·Recipient’s Name
The recipients for the alert notification, and multiple email addresses are
allowed, please separate them by “;”.
Example: jerry@yeastar.com; jason@yeastar.com, 456@sina.com
.
·Subject
The subject of the alert email.
·Email Content
Text content supports predefined variables. Variable names and corresponding
instructions are as follows:
$(HOSTNAME) Host name
$(LOCALIP) Local IP address
$(SOURCEIP) Attack source IP address
$(DATETIME) Occurred
$(USERNAME) User name (WEBLOGIN effective)
$(DESTMAC) Attacks destination MAC (IPATTACK effective)
$(DESTPORT) Attacks destination Port number (IPATTACK effective)
$(PROTOCOL) Protocol type (IPATTACK effective)
$(INTERFACE) Network interface name (IPATTACK effective)