Yeastar Technology MyPBX U100 Administrator's Guide

MyPBX U100/U200 Administrator Guide
35/195
Figure 5-21
·Enable LDAP
Enable LDAP to use LDAP on your IP phone.
·Root Node
A root node for this LDAP, e.g. dc=pbx, dc=com.
·PBX Node
A pbx node for this LDAP, e.g. ou=pbx, dc=pbx, dc=com.
·User Name
A user for this LDAP, e.g. cn=admin, dc=pbx, dc=com
·Password
A password used to access LDAP.
2) Add Contact
In Add Contact you can create them as required.
Figure 5-22
If you want to know how to use LDAP, please refer to Appendix K

Yeastar Technology MyPBX U100 Specifications

General

Brand	Yeastar Technology
Model	MyPBX U100
Category	Telephone Accessories
Language	English