MyPBX U100/U200 Administrator Guide
64/195
4) Line keys settings
We can configure the line key settings for this IP phone.
Figure 6-16
6.1.2.4 Not configured phone
In this section, MyPBX will scan all the supported IP phones and display them.
We can click the “MAC address” of an IP phone and input the corresponding
information in the pop-up window, like figure 6-13.
Figure 6-17
6.1.2.5 Upload a file
Click “Upload a file” and choose the configure file of IP phone in the popup
window.
Note: the file format must be .cfg
Please edit the configuration files in advance before uploading.
Figure 6-18