MyPBX U100/U200 Administrator Guide
66/195
Figure 6-21
·Trunk Name
A unique label used to identify this trunk when listed in outbound rules,
incoming rules, etc. E.g. “BriTrunk1”.
·Signaling
Signaling method
BRI-CPE: ISDN BRI in TE mode and Point to Point.
BRI-CPE-PTMP: ISDN BRI in TE mode and Point to multi Point.
BRI-NET: ISDN BRI in NET mode and Point to Point.
BRI-NET-PTMP: ISDN BRI in NET mode and Point to multi Point.
·Switch Type
National: National ISDN type2 (common in the US)
ni1: National ISDN type 1
dms100: Nortel DMS100