Yeastar Technology MyPBX U100 Administrator's Guide

MyPBX U100/U200 Administrator Guide
77/195
2) Add IAX trunk
Input the correct IAX information (provided by VoIP provider). Inaccurate
information will prevent the trunk from registering.
Figure 6-29
·Type
IAX – Identifies whether the trunk sends and receives calls by using the VoIP
protocol IAX.
·Provider Name
A unique label to help you identify this trunk when listed in outbound rules,
incoming rules etc. E.g. “yeastar2”.
·Hostname/IP
Service provider’s hostname or IP address. 4569 is the standard port number
used by IAX protocol. Don’t change this part if it is not required.
·Username
Username of IAX account; Used for IAX trunk registration.
·Password
Password of IAX account

Yeastar Technology MyPBX U100 Specifications

General

Brand	Yeastar Technology
Model	MyPBX U100
Category	Telephone Accessories
Language	English