3-6
IM CA71-E
■ Turning On/Off the Power
CAUTION
To verify the instrument's functionality, check that the measured value is
updated after turning on the power. If the measured value is not updated,
the reading will be incorrect and may lead to possible electrical shock or
personal injury.
Turning On/Off the POWER Switch
Pressing the
key once when the power is off turns on the calibrator.
Pressing the
key once again turns off the calibrator.
NOTE
• Before disconnecting the AC adapter from an AC power source,
turn off the calibrator by pressing the
key.
• When operating the calibrator on batteries, disconnect the AC adapter
plug from the instrument. Once you connect the AC adapter plug to
the instrument, the instrument no longer operates on batteries.
Thus, the instrument will not turn on unless the AC adapter is connected
to an AC power source.
• Be sure to turn off the POWER switch when you nish using the instrument.
3. Before Starting Source/Measurement
To Next Page
Loading...
