YOKOGAWA CA71 HANDY CAL - Clearing Data in Memory; Clearing Data by Selecting Desired; Memory Number

6-6
IM CA71-E
6.3 Clearing Data in Memory
6.3.1 Clearing Data by Selecting Desired
Memory Number
Step 1: Press the
key once. The indicator on the
LCD turns on.
Step 2: Using the pair of
key, select the memory number
whose data you want to clear.
Step 3: Pressing the
key causes the LCD to show the alarm
indication
(no.88 indicates object )
Step 4: Pressing the
key once again clears the data with the
selected memory number.
TIP
• To cancel clearing the data after the alarm indication is given,
press the
key. The calibrator reverts to memory mode
(saving/reading).
• You can also clear the data after having read it from memory.
6.3 Clearing Data in Memory