viii
IM CA71-E
WARNING
• Correct Use of Lead Cables
Use the lead cables supplied by YOKOGAWA with this instrument.
Do not use lead cables that have deteriorated or are defective.
Check lead cables continuity.
Correctly use the lead cables for measurement (P/N: RD031) and
source (P/N: 98020) without mistaking one for the other.
For high-voltage measurement, always use the lead cable for measurement.
• Do Not Remove the Casing or Disassemble
Only Yokogawa service personnel are authorized to remove the casing or
disassemble or modify the instrument.
Do not attempt to repair the instrument yourself, as doing so is extremely
dangerous. Some parts inside the instrument are extremely dangerous
because they use a high voltage.
When the instrument needs an internal inspection or calibration,
contact YOKOGAWA or the dealer from whom you purchased the instrument.
CAUTION
This product is for domestic use (Class B) and meets the electromagnetic
compatiblity requirements.
Precautions for Safe Use of the Instrument
To Next Page
Loading...
Need help?
General
