YOKOGAWA CW240

6-94
IM CW240E
● Magnification Setting Procedure
The output magnification needs to be set when the analog output item is set to
LEVEL or CONTENT. Select it from among 1 time, 10 times, and 50 times.
Item Element Order Magnification Output Rate
LEVEL
Voltage (U1, U2, U3)
Current (I1, I2, I3, I4)
Power (P)
1 to 50
1, 10, and 100
times
CONTENT
Voltage (U1, U2, U3)
Current (I1, I2, I3, I4)
Power (P)
1 to 50
1, 10, and 100
times
_
_
[ 1 Changing the magnification
Using the cursor keys, select MAG. (highlighted).
The function key labels change.
1 10 100
F 1 F 1
F 2
F 3
F 4
F 5
Default: 1
[ 2 Setup
F 1 F 1
to
F3
Press the corresponding function key to set the magnification.
F1 : 1 time
F2 : 10 times
F3 : 100 times
Ending setup:
To also change another setting To return to the Top Menu
Select a desired setting using the cursor keys. ENTER key
6.9 Analog I/O Settings