35
IM 04L05A01-02E
Stopping Measurements
1.
Press STOP.
A confirmation window appears.
DX200PDX100P
Display for models with the
computation function (/M1 option).
2.
Confirm the batch information such as the header, batch number, lot number,
and comments.
3.
Select [Mem+Math] ([Yes] on models without the computation function) using
the arrow keys and press DISP/ENTER.
Acquisition of measured data to the internal memory stops. The icon of the
status display section is displayed in red.
If “batch stop sign record” is specified (see page 18), the sign record screen
appears. Proceed to “Applying Electronic Signature.”
DX200PDX100P
Internal memory icon
Sign record screen
Note
The measured data is saved to the external storage medium when the measurement is
stopped. Make a backup of the files saved to the external storage medium.
Setting Conditions and Making Measurements
To Next Page
Loading...
Need help?
General
