31
IM 04L05A01-02E
Starting Measurements
Setting Batch Numbers, Lot Numbers, and Comments
1.
Press START.
The start window is displayed.
DX200PDX100P
2.
Select [Batch No.] using the arrow keys and press the Input soft key.
3.
Enter the batch number and press DISP/ENTER.
DX200PDX100P
Batch number
Up to 32 characters
4.
Select [Lot No.] using the arrow keys and press the Input soft key.
5.
Enter the lot number and press DISP/ENTER.
DX200PDX100P
Lot number
Up to 8 numerical digits
6.
Select [Comment1], [Comment2], or [Comment3] using the arrow keys and
press the Input soft key.
7.
Enter the comment and press DISP/ENTER.
DX200PDX100P
Comment
Up to 32 characters
(Comments are saved to data
files.)
Setting Conditions and Making Measurements
To Next Page
Loading...
