YOKOGAWA DAQSTATION DX100P User Manual

36 IM 04L05A01-02E
Applying Electronic Signature
Make sure to check the measured data and alarm information before applying
electronic signature.
1. Press DISP/ENTER.
The screen menu is displayed.
2. Select [SIGN RECORD] using the arrow keys.
DX200PDX100P
3. Press DISP/ENTER.
A sign record confirmation window appears.
4. Select [Yes] using the arrow keys and press DISP/ENTER.
If the use of the user ID is enabled (see page 18), a window appears for you to
enter the user ID. Proceed to step 5.
If the use of the user ID is disabled, a window appears for you to enter the
password. Proceed to step 6.
DX200PDX100P
5. Enter the user ID and press DISP/ENTER.
A window appears for you to enter the password.
DX200PDX100P
Setting Conditions and Making Measurements

YOKOGAWA DAQSTATION DX100P Specifications

General

Brand	YOKOGAWA
Model	DAQSTATION DX100P
Category	Measuring Instruments
Language	English