YOKOGAWA DL9040 User Manual

5-89
IM 701310-17E
Commands
1
2
3
4
5
6
App
Index
:FILE:SAVE:{AHIStogram|FFT|SBUS}:
ANALysis
Function Sets the trace of specific data to be saved or queries
the current setting.
Syntax
FILE:SAVE:{AHIStogram|FFT|SBUS}:
ANALysis {<NRf>}
FILE:SAVE:{AHIStogram|FFT|SBUS}:
ANALysis?
<NRf> = 1 to 2
Example (The following is an example for FFT
data.)
:FILE:SAVE:FFT:ANALYSIS 1
:FILE:SAVE:FFT:ANALYSIS? -> :FILE:SAVE:
FFT:ANALYSIS 1
:FILE:SAVE:ANAMing
Function Sets the type of auto naming of file names of the
saved data or queries the current setting.
Syntax
:FILE:SAVE:ANAMing {DATE|NUMBering|OFF}
:FILE:SAVE:ANAMing?
Example
:FILE:SAVE:ANAMING DATE
:FILE:SAVE:ANAMING? -> :FILE:SAVE:
ANAMING DATE
:FILE:SAVE:ASCii:RANGe
Function Sets the ASCII data saving range or queries the
current setting.
Syntax
:FILE:SAVE:ASCii:RANGe {MAIN|Z1|Z2}
:FILE:SAVE:ASCii:RANGe?
Example
:FILE:SAVE:ASCII:RANGE MAIN
:FILE:SAVE:ASCII:RANGE? -> :FILE:SAVE:
ASCII:RANGE MAIN
:FILE:SAVE:{ASCii|BINary|FLOat}:
COMPression
Function Sets the compression method for saving specific data
or queries the current setting.
Syntax
:FILE:SAVE:{ASCii|BINary|FLOat}:
COMPression {DECimation|OFF|PTOPeak}
:FILE:SAVE:{ASCii|BINary|FLOat}:
COMPression?
Example (The following is an example for binary data.)
:FILE:SAVE:BINARY:
COMPRESSION DECIMATION
:FILE:SAVE:BINARY:COMPRESSION?
-> :FILE:SAVE:BINARY:
COMPRESSION DECIMATION
:FILE:SAVE:{ASCii|BINary|FLOat}:
HISTory
Function Sets whether to save the entire data or the selected
data of specific data or queries the current setting.
Syntax
:FILE:SAVE:{ASCii|BINary|FLOat}:
HISTory {ALL|ONE}
:FILE:SAVE:{ASCii|BINary|FLOat}:
HISTory?
Example (The following is an example for binary data.)
:FILE:SAVE:BINARY:HISTORY ALL
:FILE:SAVE:BINARY:HISTORY? -> :FILE:
SAVE:BINARY:HISTORY ALL
:FILE:SAVE:{ASCii|BINary|FLOat}:LENGth
Function Sets the size of waveform data to save for each type
of data or queries the current setting.
Syntax
:FILE:SAVE:{ASCii|BINary|FLOat}:
LENGth {<NRf>}
:FILE:SAVE:{ASCii|BINary|FLOat}:LENGth?
<NRf> = See the main unit User’
s Manual.
Example (The following is an example with binary data. )
:FILE:SAVE:BINARY:LENGTH 2500
:FILE:SAVE:BINARY:LENGTH? ->
:FILE:SAVE:BINARY:LENGTH 2500
:FILE:SAVE:{ASCii|BINary|FLOat}:TRACe
Function Sets the trace of specific data to be saved or queries
the current setting.
Syntax
:FILE:SAVE:{ASCii|BINary|FLOat}:
TRACe {<NRf>|ALL}
:FILE:SAVE:{ASCii|BINary|FLOat}:TRACe?
<NRf> = 1 to 8
Example (The following is an example for binary data.)
:FILE:SAVE:BINARY:TRACE 1
:FILE:SAVE:BINARY:TRACE? -> :FILE:SAVE:
BINARY:TRACE 1
:FILE:SAVE:COMMent
Function Sets the comment of data to be saved or queries the
current setting.
Syntax
:FILE:SAVE:COMMent {<String>}
:FILE:SAVE:COMMent?
<String> = Up to 160 characters
Example
:FILE:SAVE:COMMENT "THIS IS TEST"
:FILE:SAVE:COMMENT? -> :FILE:SAVE:
COMMENT "THIS IS TEST"
5.11 FILE Group

YOKOGAWA DL9040 Specifications

General

Brand	YOKOGAWA
Model	DL9040
Category	Test Equipment
Language	English