YOKOGAWA DL9040

5-92
IM 701310-17E
:GONogo:ACTion:SAVE
Function Sets whether to save the waveform data to the
storage medium when the determination result is NO-
GO or queries the current setting.
Syntax
:GONogo:ACTion:SAVE {<Boolean>}
:GONogo:ACTion:SAVE?
Example
:GONOGO:ACTION:SAVE ON
:GONOGO:ACTION:SAVE? -> :GONOGO:ACTION:
SAVE 1
:GONogo:CONDition<x>
Function Sets the GO/NO-GO determination criteria or queries
the current setting.
Syntax
:GONogo:CONDition<x> {DONTcare|IN|OUT}
:GONogo:CONDition<x>?
<x> = 1 to 4
Example
:GONOGO:CONDITION1 DONTCARE
:GONOGO:CONDITION1? -> :GONOGO:
CONDITION1 DONTCARE
:GONogo:COUNt?
Function Queries the actual number of GO/NO-GO
determinations.
Syntax
:GONogo:COUNt?
Example
:GONOGO:COUNT? -> :GONOGO:COUNT 1
:GONogo:EXECute
Function Executes the GO/NO-GO determination. This is an
overlap command.
Syntax
:GONogo:EXECute
Example
:GONOGO:EXECUTE
:GONogo:LOGic
Function Sets the GO/NO-GO determination logic or queries
the current setting.
Syntax
:GONogo:LOGic {AND|OR}
:GONogo:LOGic?
Example
:GONOGO:LOGIC AND
:GONOGO:LOGIC? -> :GONOGO:LOGIC AND
:GONogo:MODE
Function Sets the GO/NO-GO determination type or queries
the current setting.
Syntax
GONogo:MODE {OFF|TELecomtest|
ZPARameter}
:GONogo:MODE?
Example
GONOGO:MODE OFF
:GONOGO:MODE? -> :GONOGO:MODE OFF
:GONogo:NGCount?
Function Queries the actual number of NO-GOs of the GO/NO-
GO determination.
Syntax
:GONogo:NGCount?
Example
:GONOGO:NGCOUNT? -> :GONOGO:NGCOUNT 1
:GONogo:SCONdition? (Stop Condition)
Function Queries all settings related to the determination
termination condition.
Syntax
:GONogo:SCONdition?
Example
:GONOGO:SCONDITION? -> :GONOGO:
SCONDITION:NGCOUNT 1;STOPCOUNT 1
:GONogo[:SCONdition]:NGCount
Function Sets the number of NO-GOs that terminates the GO/
NO-GO determination or queries the current setting.
Syntax
:GONogo[:SCONdition]:NGCount {<NRf>|
INFinite}
:GONogo[:SCONdition]:NGCount?
<NRf> = 1 to 1000
Example
:GONOGO:SCONDITION:NGCOUNT 1
:GONOGO:SCONDITION:NGCOUNT? -> :GONOGO:
SCONDITION:NGCOUNT 1
:GONogo[:SCONdition]:STOPcount
Function Sets the acquisition count that terminates the GO/
NO-GO determination or queries the current setting.
Syntax
:GONogo[:SCONdition]:STOPcount {<NRf>|
INFinite}
:GONogo[:SCONdition]:STOPcount?
<NRf> = 1 to 1000000
Example
:GONOGO:SCONDITION:STOPCOUNT 1
:GONOGO:SCONDITION:STOPCOUNT?
-> :GONOGO:SCONDITION:STOPCOUNT 1
:GONogo:TELecomtest?
Function Queries all settings related to telecom test
determination.
Syntax
:GONogo:TELecomtest?
Example
:GONOGO:TELECOMTEST? -> :GONOGO:
TELECOMTEST:SELECT1:MASK:ELEMENT1:
WCOUNT 2.000E+00,1.000E+00;:GONOGO:
TELECOMTEST:SELECT2:MASK:ELEMENT1:
WCOUNT 2.000E+00,1.000E+00;:GONOGO:
TELECOMTEST:SELECT3:MASK:ELEMENT1:
WCOUNT 2.000E+00,1.000E+00;:GONOGO:
TELECOMTEST:SELECT4:MASK:ELEMENT1:
WCOUNT 2.000E+00,1.000E+00
:GONogo:TELecomtest:SELect<x>?
Function Queries all settings related to the condition of the
telecom test determination.
Syntax
:GONogo:TELecomtest:SELect<x>?
<x> = 1 to 4
Example
:GONOGO:TELECOMTEST:SELECT1?
-> :GONOGO:TELECOMTEST:SELECT1:MASK:
ELEMENT1:PSPCOUNT 2.000E+00,1.000E+00
5.12 GONogo Group