YOKOGAWA DL9040 User Manual

5-109
IM 701310-17E
Commands
1
2
3
4
5
6
App
Index
:HISTory[:CURRent][:SEARch]:SELect<x>:
WAVE:EDIT<x>:EXIT
Function Exits the zone edit menu of the wave search.
Syntax
:HISTory[:CURRent][:SEARch]:SELect<x>:
WAVE:EDIT<x>:EXIT {<NRf>|QUIT}
<x> of SELect<x> = 1 to 4
<x> of EDIT<x> = 1 to 13
<NRf> = 1 to 4 (internal memories)
Example
:HISTORY:CURRENT:SEARCH:SELECT1:WAVE:
EDIT1:EXIT 1
Description • An error occurs if this command is issued when the
zone is not being edited.
• Saves the zone waveform to the internal memory
specified by <NRf>.
:HISTory[:CURRent][:SEARch]:SELect<x>:
WAVE:EDIT<x>:PART
Function Sets the editing of the portion of the zone of the wave
search.
Syntax
:HISTory[:CURRent][:SEARch]:SELect<x>:
WAVE:EDIT<x>:PART {<NRf>,<NRf>,<NRf>,<N
Rf>}
<x> of SELect<x> = 1 to 4
<x> of EDIT<x> = 1 to13 (1 to 8 are traces. 9 to 12
are internal memories. 13 is the zone waveform that
is currently displayed)
<NRf> = –5 to 5 (div: partial editing time axis cursor 1
and 2)
–8 to 8 (div: up and down) (in the order
partialeditingtimeaxiscursor1,2,↑,and↓)
Example
:HISTORY:CURRENT:SEARCH:SELECT1:WAVE:
EDIT1:PART 1,2,3,4
Description The amount of movement upward or downward is a
relative value with respect to the zone waveform that
is currently displayed.
:HISTory[:CURRent][:SEARch]:SELect<x>:
WAVE:EDIT<x>:WHOLe
Function Sets the editing of the entire zone of the wave search.
Syntax
:HISTory[:CURRent][:SEARch]:SELect<x>:
WAVE:EDIT<x>:
WHOLe {<NRf>,<NRf>,<NRf>,<NRf>}
<x> of SELect<x> = 1 to 4
<x> of EDIT<x> = 1 to13 (1 to 8 are traces. 9 to 12
are internal memories. 13 is the zone waveform that
is currently displayed)
<NRf> = 0 to 5 (div: left and right)
0 to 8 (div: up and down)
  (Intheorder←,→,↑,and↓)
Example
:HISTORY:CURRENT:SEARCH:SELECT1:WAVE:
EDIT1:WHOLE 1,2,3,4
Description The amount of movement is a relative value with
respect to the reference waveform.
:HISTory[:CURRent][:SEARch]:SELect<x>:
RECTangle:VERTical
Function Sets the vertical position of the rectangle used in the
rectangle search or queries the current setting.
Syntax
:HISTory[:CURRent][:SEARch]:SELect<x>:
RECTangle:VERTical {<NRf>,<NRf>}
:HISTory[:CURRent][:SEARch]:SELect<x>:
RECTangle:VERTical?
<x> = 1 to 4
<NRf> = –4 to 4 (div)
Example
:HISTORY:CURRENT:SEARCH:SELECT1:
RECTANGLE:VERTICAL 1,2
:HISTORY:CURRENT:SEARCH:SELECT1:
RECTANGLE:VERTICAL? -> :HISTORY:
CURRENT:SEARCH:SELECT1:
RECTANGLE:VERTICAL 2.000E+00,1.000E+00
:HISTory[:CURRent][:SEARch]:SELect<x>:
TRACe
Function Sets the source trace of the history search or queries
the current setting.
Syntax
:HISTory[:CURRent][:SEARch]:SELect<x>:
TRACe {<NRf>}
:HISTory[:CURRent][:SEARch]:SELect<x>:
TRACe?
<x> = 1 to 4
<NRf> = 1 to 8
Example
:HISTORY:CURRENT:SEARCH:SELECT1:TRACE 1
:HISTORY:CURRENT:SEARCH:SELECT1:TRACE?
-> :HISTORY:CURRENT:SEARCH:SELECT1:
TRACE 1
Description This command is invalid when Window is XY.
:HISTory[:CURRent][:SEARch]:SELect<x>:
WAVE?
Function Queries all settings related to the search in the
waveform zone (wave search).
Syntax
:HISTory[:CURRent][:SEARch]:SELect<x>:
WAVE?
<x> = 1 to 4
Example
:HISTORY:CURRENT:SEARCH:SELECT1:WAVE?
-> :HISTORY:CURRENT:SEARCH:SELECT1:
WAVE:TRANGE 2.000E+00,1.000E+00
5.14 HISTory Group

YOKOGAWA DL9040 Specifications

General

Brand	YOKOGAWA
Model	DL9040
Category	Test Equipment
Language	English