YOKOGAWA DL9040 User Manual

5-136
IM 701310-17E
:SEARch<x>:TYPE
Function Sets the search type or queries the current setting.
Syntax
:SEARch<x>:TYPE {EDGE|EQUalify|
SPATtern|STATe|WIDTh}
:SEARch<x>:TYPE?
<x> = 1 or 2
Example
:SEARCH1:TYPE EDGE
:SEARCH1:TYPE? -> :SEARCH1:TYPE EDGE
:SEARch<x>:WIDTh?
Function Queries all settings related to the pulse width search.
Syntax
:SEARch<x>:WIDTh?
<x> = 1 or 2
Example
:SEARCH1:WIDTH? -> :SEARCH1:WIDTH:
MODE OUT;TIME1 1.000E-09;
TIME2 2.000E-09;TYPE PULSE
:SEARch<x>:WIDTh:MODE
Function Sets the pulse width determination mode or queries
the current setting.
Syntax
:SEARch<x>:WIDTh:MODE {BETWeen|IN|NOTBe
tween|OUT|TIMeout}
:SEARch<x>:WIDTh:MODE?
<x> = 1 or 2
Example
:SEARCH1:WIDTH:MODE TIMEOUT
:SEARCH1:WIDTH:MODE? -> :SEARCH1:WIDTH:
MODE TIMEOUT
:SEARch<x>:WIDTh:TIME<x>
Function Sets the pulse width of the pulse width search or
queries the current setting.
Syntax
:SEARch<x>:WIDTh:TIME<x> {<Time>}
:SEARch<x>:WIDTh:TIME<x>?
<x> of SEARch<x> = 1 or 2
<x> of
TIME<x> = 1 or 2
<Time> = 1 ns to 10 s in 500-ps steps
Example
:SEARCH1:WIDTH:TIME1 1S
:SEARCH1:WIDTH:TIME1? -> :SEARCH1:
WIDTH:TIME1 1.000E+00
Description
TIME2 is valid when
:SEARch<x>:WIDTh:MODE
BETWeen|NOTBetween
.
:SEARch<x>:WIDTh:TYPE
Function Sets the pulse width search type or queries the
current setting.
Syntax
:SEARch<x>:WIDTh:TYPE {PQUalify|PSTAte|
PULSe}
:SEARch<x>:WIDTh:TYPE?
<x> = 1 or 2
Example
:SEARCH1:WIDTH:TYPE PQUALIFY
:SEARCH1:WIDTH:TYPE? -> :SEARCH1:WIDTH:
TYPE PQUALIFY
:SEARch<x>:TRACe<x>?
Function Queries all settings related to the search conditions
of the trace.
Syntax
:SEARch<x>:TRACe<x>?
<x> of SEARch<x> = 1 or 2
<x> of
TRACe<x> = 1 to 8
Example
:SEARCH1:TRACE1? -> :SEARCH1:TRACE1:
CONDITION DONTCARE;
HYSTERESIS 1.000E+00;LEVEL 0.000E+00
:SEARch<x>:TRACe<x>:CONDition
Function Sets the condition to be satisfied for the trace or
queries the current setting.
Syntax
:SEARch<x>:TRACe<x>:
CONDition {DONTcare|HIGH|LOW}
:SEARch<x>:TRACe<x>:CONDition?
<x> of SEARch<x> = 1 or 2
<x> of
TRACe<x> = 1 to 8
Example
:SEARCH1:TRACE1:CONDITION HIGH
:SEARCH1:TRACE1:CONDITION? -> :SEARCH1:
TRACE1:CONDITION HIGH
Description
• This command is valid when
:SEARch<x>:TYPE
EQUalify|SPATtern|STAT
e.
• This command is valid when
:SEARch<x>:
TYPE WIDTh
and
:SEARch<x>:WIDTh:TYPE
PQUalify|PSTAte
.
:SEARch<x>:TRACe<x>:HYSTeresis
Function Sets the hysteresis of the trace or queries the current
setting.
Syntax
:SEARch<x>:TRACe<x>:HYSTeresis {<NRf>}
:SEARch<x>:TRACe<x>:HYSTeresis?
<x> of SEARch<x> = 1 or 2
<x> of
TRACe<x> = 1 to 8
<NRf> = 0 to 4 (div, in 0.1-div steps)
Example
:SEARCH1:TRACE1:HYSTERESIS 1
:SEARCH1:TRACE1:HYSTERESIS?
-> :SEARCH1:TRACE1:HYSTERESIS 1.000E+00
:SEARch<x>:TRACe<x>:LEVel
Function Sets the threshold level of the trace or queries the
current setting.
Syntax
:SEARch<x>:TRACe<x>:LEVel {<NRf>|
<Voltage>|<Current>}
:SEARch<x>:TRACe<x>:LEVel?
<x> of SEARch<x> = 1 or 2
<x> of
TRACe<x> = 1 to 8
<NRf>, <Voltage>, and <Current> = See the DL9000
User’s Manual.
Example
:SEARCH1:TRACE1:LEVEL 0
:SEARCH1:TRACE1:LEVEL? -> :SEARCH1:
TRACE1:LEVEL 0.000E+00
5.20 SEARch Group

YOKOGAWA DL9040 Specifications

General

Brand	YOKOGAWA
Model	DL9040
Category	Test Equipment
Language	English