YOKOGAWA DL9040

5-160
IM 701310-17E
:TRIGger:EINTerval:EVENt<x>:CANBus:
IDOR:ID<x>:RTR
Function Sets each RTR of the OR condition of the CAN bus
signal trigger or queries the current setting.
Syntax
:TRIGger:EINTerval:EVENt<x>:CANBus:
IDOR:ID<x>:RTR {DATA|DONTcare|REMote}
:TRIGger:EINTerval:EVENt<x>:CANBus:
IDOR:ID<x>:RTR?
<x> of EVENt<x> = 1 or 2
<x> of ID<x> = 1 to 4
Example
:TRIGGER:EINTERVAL:EVENT1:CANBUS:
IDOR:ID1:RTR DATA
:TRIGGER:EINTERVAL:EVENT1:CANBUS:
IDOR:ID1:RTR? -> :TRIGGER:EINTERVAL:
EVENT1:CANBUS:IDOR:ID1:RTR DATA
:TRIGger:EINTerval:EVENt<x>:CANBus:
IDSTd?
Function Queries all settings related to the ID of the standard
format of the CAN bus signal trigger.
Syntax
:TRIGger:EINTerval:EVENt<x>:CANBus:
IDSTd?
<x> = 1 or 2
Example
:TRIGGER:EINTERVAL:EVENT1:CANBUS:
IDSTD? -> :TRIGGER:EINTERVAL:EVENT1:
CANBUS:IDSTD:PATTERN "00011111101"
:TRIGger:EINTerval:EVENt<x>:CANBus:
IDSTd:HEXA
Function Sets the ID of the standard format of the CAN bus
signal trigger in hexadecimal notation.
Syntax
:TRIGger:EINTerval:EVENt<x>:CANBus:
IDSTd:HEXA {<String>}
<x> = 1 or 2
<String> = 8 characters by combining ‘0’
to ‘F’ and ‘X’
Example
:TRIGGER:EINTERVAL:EVENT1:CANBUS:
IDSTD:HEXA "5DF"
:TRIGger:EINTerval:EVENt<x>:CANBus:
IDSTd:PATTern
Function Sets the ID of the standard format of the CAN bus
signal trigger in binary notation or queries the current
setting.
Syntax
:TRIGger:EINTerval:EVENt<x>:CANBus:
IDSTd:PATTern {<String>}
:TRIGger:EINTerval:EVENt<x>:CANBus:
IDSTd:PATTern?
<x> = 1 or 2
<String> = 1
1 characters by combining ‘0,’ ‘1,’ and ‘X’
Example
:TRIGGER:EINTERVAL:EVENT1:CANBUS:
IDSTD:PATTERN "10111011111"
:TRIGGER:EINTERVAL:EVENT1:CANBUS:
IDSTD:PATTERN? -> :TRIGGER:EINTERVAL:
EVENT1:CANBUS:IDSTD:
PATTERN "10111011111"
:TRIGger:EINTerval:EVENt<x>:CANBus:
MODE
Function Sets the CAN bus signal trigger mode or queries the
current setting.
Syntax
:TRIGger:EINTerval:EVENt<x>:CANBus:
MODE {EFRame|IDEXt|IDOR|IDSTd|SOF}
:TRIGger:EINTerval:EVENt<x>:CANBus:
MODE?
<x> = 1 or 2
Example
:TRIGGER:EINTERVAL:EVENT1:CANBUS:
MODE EFRAME
:TRIGGER:EINTERVAL:EVENT1:CANBUS:
MODE? -> :TRIGGER:EINTERVAL:EVENT1:
CANBUS:MODE EFRAME
:TRIGger:EINTerval:EVENt<x>:CANBus:
RECessive
Function Sets the recessive level (bus level) of the CAN bus
signal trigger or queries the current setting.
Syntax
:TRIGger:EINTerval:EVENt<x>:CANBus:
RECessive {HIGH|LOW}
:TRIGger:EINTerval:EVENt<x>:CANBus:
RECessive?
<x> = 1 or 2
Example
:TRIGGER:EINTERVAL:EVENT1:CANBUS:
RECESSIVE HIGH
:TRIGGER:EINTERVAL:EVENT1:CANBUS:
RECESSIVE? -> :TRIGGER:EINTERVAL:
EVENT1:CANBUS:RECESSIVE HIGH
5.29 TRIGger Group