YOKOGAWA DL9040

5-161
IM 701310-17E
Commands
1
2
3
4
5
6
App
Index
:TRIGger:EINTerval:EVENt<x>:CANBus:RTR
Function Sets the RTR of the CAN bus signal trigger or queries
the current setting.
Syntax
:TRIGger:EINTerval:EVENt<x>:CANBus:
RTR {DATA|DONTcare|REMote}
:TRIGger:EINTerval:EVENt<x>:CANBus:
RTR?
<x> = 1 or 2
Example
:TRIGGER:EINTERVAL:EVENT1:CANBUS:
RTR DATA
:TRIGGER:EINTERVAL:EVENT1:CANBUS:
RTR? -> :TRIGGER:EINTERVAL:EVENT1:
CANBUS:RTR DATA
:TRIGger:EINTerval:EVENt<x>:CANBus:
SOURce
Function Sets the trigger source of the CAN bus signal trigger
or queries the current setting.
Syntax
:TRIGger:EINTerval:EVENt<x>:CANBus:
SOURce {<NRf>}
:TRIGger:EINTerval:EVENt<x>:CANBus:
SOURce?
<x> = 1 or 2
<NRf> = 1 to 4
Example
:TRIGGER:EINTERVAL:EVENT1:CANBUS:
SOURCE 1
:TRIGGER:EINTERVAL:EVENT1:CANBUS:
SOURCE? -> :TRIGGER:EINTERVAL:EVENT1:
CANBUS:SOURCE 1
:TRIGger:EINTerval:EVENt<x>:CANBus:
SPOint
Function Sets the sample point of the CAN bus signal trigger
or queries the current setting.
Syntax
:TRIGger:EINTerval:EVENt<x>:CANBus:
SPOint {<NRf>}
:TRIGger:EINTerval:EVENt<x>:CANBus:
SPOint?
<x> = 1 or 2
<NRf> = 18.8 to 90.6(%)
Example
:TRIGGER:EINTERVAL:EVENT1:CANBUS:
SPOINT 18.8
:TRIGGER:EINTERVAL:EVENT1:CANBUS:
SPOINT? -> :TRIGGER:EINTERVAL:EVENT1:
CANBUS:SPOINT 18.8E+00
:TRIGger:EINTerval:EVENt<x>:CLOCk?
Function Queries all settings related to the clock channel of the
event.
Syntax
:TRIGger:EINTerval:EVENt<x>:CLOCk?
<x> = 1 or 2
Example
:TRIGGER:EINTERVAL:EVENT1:CLOCK?
-> :TRIGGER:EINTERVAL:EVENT1:CLOCK:
SOURCE 1;POLARITY FALL
:TRIGger:EINTerval:EVENt<x>:CLOCk:
POLarity
Function Sets the polarity of the clock channel of the event or
queries the current setting.
Syntax
:TRIGger:EINTerval:EVENt<x>:CLOCk:
POLarity {ENTer|EXIT|FALL|RISE}
:TRIGger:EINTerval:EVENt<x>:CLOCk:
POLarity?
<x> = 1 or 2
Example
:TRIGGER:EINTERVAL:EVENT1:CLOCK:
POLARITY FALL
:TRIGGER:EINTERVAL:EVENT1:CLOCK:
POLARITY? -> :TRIGGER:EINTERVAL:EVENT1:
CLOCK:POLARITY FALL
Description • This command in invalid if
:TRIGger:
EINTerval:EVENt<x>:CLOCk:SOURce NONE
.
• {ENT
er|EXIT} is valid when :
TRIGger:SOURce:
CHANnel<x>:WINDow ON
. For all other cases,
{FALL|RISE} is valid.
•
This command is valid when
:TRIGger:
EINTerval:EVENt<x>:TYPE PSTAte|STATe
.
:TRIGger:EINTerval:EVENt<x>:CLOCk:
SOURce
Function Sets the source waveform of the clock channel of the
event or queries the current setting.
Syntax
:TRIGger:EINTerval:EVENt<x>:CLOCk:
SOURce {<NRf>|NONE}
:TRIGger:EINTerval:EVENt<x>:CLOCk:
SOURce?
<x> = 1 or 2
<NRf> = 1 to 4
Example
:TRIGGER:EINTERVAL:EVENT1:CLOCK:
SOURCE 1
:TRIGGER:EINTERVAL:EVENT1:CLOCK:SOURCE?
-> :TRIGGER:EINTERVAL:EVENT1:CLOCK:
SOURCE 1
Description This command is valid when :TRIGger:EINTerval:
EVENt<x>:TYPE PSTAte|STATe.
:TRIGger:EINTerval:EVENt<x>:ESTate?
Function Queries all settings related to the edge/state trigger.
Syntax
:TRIGger:EINTerval:EVENt<x>:ESTate?
<x> = 1 or 2
Example
:TRIGGER:EINTERVAL:EVENT1:ESTATE?
-> :TRIGGER:EINTERVAL:EVENT1:ESTATE:
SOURCE 1;POLARITY FALL
5.29 TRIGger Group