YOKOGAWA DL9040 - Page 204

5-170
IM 701310-17E
:TRIGger:EINTerval:EVENt<x>:SPATtern:
CLOCk:SOURce
Function Sets the clock trace of the serial pattern trigger or
queries the current setting.
Syntax
:TRIGger:EINTerval:EVENt<x>:SPATtern:
CLOCk:SOURce {<NRf>}
:TRIGger:EINTerval:EVENt<x>:SPATtern:
CLOCk:SOURce?
<x> = 1 or 2
<NRf> = 1 to 4
Example
:TRIGGER:EINTERVAL:EVENT1:SPATTERN:
CLOCK:SOURCE 1
:TRIGGER:EINTERVAL:EVENT1:SPATTERN:
CLOCK:SOURCE? -> :TRIGGER:EINTERVAL:
EVENT1:SPATTERN:CLOCK:SOURCE 1
Description This command is valid when
:TRIGger:
EINTerval:EVENt<x>:SPATtern:CLOCk:
MODE ON
.
:TRIGger:EINTerval:EVENt<x>:SPATtern:
CS
Function Enables/Disables the chip select of the serial pattern
trigger or queries the current setting.
Syntax
:TRIGger:EINTerval:EVENt<x>:SPATtern:
CS {<Boolean>}
:TRIGger:EINTerval:EVENt<x>:SPATtern:
CS?
<x> = 1 or 2
Example
:TRIGGER:EINTERVAL:EVENT1:SPATTERN:
CS ON
:TRIGGER:EINTERVAL:EVENT1:SPATTERN:CS?
-> :TRIGGER:EINTERVAL:EVENT1:SPATTERN:
CS 1
Description This command is valid when
:TRIGger:
EINTerval:EVENt<x>:SPATtern:CLOCk:
MODE ON
.
:TRIGger:EINTerval:EVENt<x>:SPATtern:
DATA?
Function Queries all settings related to data of the serial
pattern trigger.
Syntax
:TRIGger:EINTerval:EVENt<x>:SPATtern:
DATA?
<x> = 1 or 2
Example
:TRIGGER:EINTERVAL:EVENT1:SPATTERN:
DATA? -> :TRIGGER:EINTERVAL:EVENT1:
SPATTERN:DATA:ACTIVE HIGH;SOURCE 1
:TRIGger:EINTerval:EVENt<x>:SPATtern:
DATA:ACTive
Function Sets the active level of the data of the serial pattern
trigger or queries the current setting.
Syntax
:TRIGger:EINTerval:EVENt<x>:SPATtern:
DATA:ACTive {HIGH|LOW}
:TRIGger:EINTerval:EVENt<x>:SPATtern:
DATA:ACTive?
<x> = 1 or 2
Example
:TRIGGER:EINTERVAL:EVENT1:SPATTERN:
DATA:ACTIVE HIGH
:TRIGGER:EINTERVAL:EVENT1:SPATTERN:
DATA:ACTIVE? -> :TRIGGER:EINTERVAL:
EVENT1:SPATTERN:DATA:ACTIVE HIGH
:TRIGger:EINTerval:EVENt<x>:SPATtern:
DATA:SOURce
Function Sets the data trace of the serial pattern trigger or
queries the current setting.
Syntax
:TRIGger:EINTerval:EVENt<x>:SPATtern:
DATA:SOURce {<NRf>}
:TRIGger:EINTerval:EVENt<x>:SPATtern:
DATA:SOURce?
<x> = 1 or 2
<NRf> = 1 to 4
Example
:TRIGGER:EINTERVAL:EVENT1:SPATTERN:
DATA:SOURCE 1
:TRIGGER:EINTERVAL:EVENT1:SPATTERN:
DATA:SOURCE? -> :TRIGGER:EINTERVAL:
EVENT1:SPATTERN:DATA:SOURCE 1
:TRIGger:EINTerval:EVENt<x>:SPATtern:
HEXA
Function Sets the pattern of the serial pattern trigger in
hexadecimal notation.
Syntax
:TRIGger:EINTerval:EVENt<x>:SPATtern:
HEXA {<String>}
<x> = 1 or 2
<String> = Up to 32 characters by combining ‘0’
to ‘F’
and ‘X’
Example
:TRIGGER:EINTERVAL:EVENT1:SPATTERN:
HEXA "ABCD"
:TRIGger:EINTerval:EVENt<x>:SPATtern:
LATCh?
Function Queries all settings related to latch of the serial
pattern trigger.
Syntax
:TRIGger:EINTerval:EVENt<x>:SPATtern:
LATCh?
<x> = 1 or 2
Example
:TRIGGER:EINTERVAL:EVENT1:SPATTERN:
LATCH? -> :TRIGGER:EINTERVAL:EVENT1:
SPATTERN:LATCH:SOURCE 1;POLARITY FALL
5.29 TRIGger Group