YOKOGAWA DL9040 - Page 206

5-172
IM 701310-17E
:TRIGger:EINTerval:EVENt<x>:SPIBus:
CLOCk?
Function Queries all settings related to the clock of the SPI bus
trigger.
Syntax
:TRIGger:EINTerval:EVENt<x>:SPIBus:
CLOCk?
<x> = 1 or 2
Example
:TRIGGER:EINTERVAL:EVENT1:SPIBUS:CLOCK?
-> :TRIGGER:EINTERVAL:EVENT1:SPIBUS:
CLOCK:POLARITY FALL;SOURCE 1
:TRIGger:EINTerval:EVENt<x>:SPIBus:
CLOCk:POLarity
Function Sets the polarity of the clock trace of the SPI bus
trigger or queries the current setting.
Syntax
:TRIGger:EINTerval:EVENt<x>:SPIBus:
CLOCk:POLarity {FALL|RISE}
:TRIGger:EINTerval:EVENt<x>:SPIBus:
CLOCk:POLarity?
<x> = 1 or 2
Example
:TRIGGER:EINTERVAL:EVENT1:SPIBUS:CLOCK:
POLARITY FALL
:TRIGGER:EINTERVAL:EVENT1:SPIBUS:CLOCK:
POLARITY? -> :TRIGGER:EINTERVAL:EVENT1:
SPIBUS:CLOCK:POLARITY FALL
:TRIGger:EINTerval:EVENt<x>:SPIBus:
CLOCk:SOURce
Function Sets the clock trace of the SPI bus trigger or queries
the current setting.
Syntax
:TRIGger:EINTerval:EVENt<x>:SPIBus:
CLOCk:SOURce {<NRf>}
:TRIGger:EINTerval:EVENt<x>:SPIBus:
CLOCk:SOURce?
<x> = 1 or 2
<NRf> = 1 to 4
Example
:TRIGGER:EINTERVAL:EVENT1:SPIBUS:CLOCK:
SOURCE 1
:TRIGGER:EINTERVAL:EVENT1:SPIBUS:CLOCK:
SOURCE? -> :TRIGGER:EINTERVAL:EVENT1:
SPIBUS:CLOCK:SOURCE 1
:TRIGger:EINTerval:EVENt<x>:SPIBus:CS?
Function Queries all settings related to the chip select of the
SPI bus trigger.
Syntax
:TRIGger:EINTerval:EVENt<x>:SPIBus:CS?
<x> = 1 or 2
Example
:TRIGGER:EINTERVAL:EVENT1:SPIBUS:CS?
-> :TRIGGER:EINTERVAL:EVENT1:SPIBUS:CS:
ACTIVE HIGH;SOURCE 1
:TRIGger:EINTerval:EVENt<x>:SPIBus:CS:
ACTive
Function Sets the active level of the chip select of the SPI bus
trigger or queries the current setting.
Syntax
:TRIGger:EINTerval:EVENt<x>:SPIBus:CS:
ACTive {HIGH|LOW}
:TRIGger:EINTerval:EVENt<x>:SPIBus:CS:
ACTive?
<x> = 1 or 2
Example
:TRIGGER:EINTERVAL:EVENT1:SPIBUS:CS:
ACTIVE HIGH
:TRIGGER:EINTERVAL:EVENT1:SPIBUS:CS:
ACTIVE? -> :TRIGGER:EINTERVAL:EVENT1:
SPIBUS:CS:ACTIVE HIGH
:TRIGger:EINTerval:EVENt<x>:SPIBus:CS:
SOURce
Function Sets the chip select trace of the SPI bus trigger or
queries the current setting.
Syntax
:TRIGger:EINTerval:EVENt<x>:SPIBus:CS:
SOURce {<NRf>}
:TRIGger:EINTerval:EVENt<x>:SPIBus:CS:
SOURce?
<x> = 1 or 2
<NRf> = 1 to 4
Example
:TRIGGER:EINTERVAL:EVENT1:SPIBUS:CS:
SOURCE 1
:TRIGGER:EINTERVAL:EVENT1:SPIBUS:CS:
SOURCE? -> :TRIGGER:EINTERVAL:EVENT1:
SPIBUS:CS:SOURCE 1
:TRIGger:EINTerval:EVENt<x>:SPIBus:
DATA<x>?
Function Queries all settings related to the data of the SPI bus
trigger.
Syntax
:TRIGger:EINTerval:EVENt<x>:SPIBus:
DATA<x>?
<x> of EVENt<x> = 1 or 2
<x> of DA
TA<x> = 1 or 2
Example
:TRIGGER:EINTERVAL:EVENT1:SPIBUS:DATA1?
-> :TRIGGER:EINTERVAL:EVENT1:SPIBUS:
DATA1:BYTE 1;CONDITION TRUE;
DPOSITION 1;PATTERN1 "00010010";
PATTERN2 "00110100";
PATTERN3 "01010110";
PATTERN4 "00010010";SOURCE 3
Description DAT
A2 is valid when
:TRIGger:EINTerval:
EVENt<x>:SPIBus:MODE WIRE4
.
5.29 TRIGger Group