YOKOGAWA DL9040

5-196
IM 701310-17E
:TRIGger:ESTate?
Function Queries all settings related to the edge/state trigger.
Syntax
:TRIGger:ESTate?
Example
:TRIGGER:ESTATE? -> :TRIGGER:ESTATE:
EOR:CHANNEL1 DONTCARE;
CHANNEL2 DONTCARE;CHANNEL3 DONTCARE;
CHANNEL4 DONTCARE;:TRIGGER:ESTATE:
SOURCE 1;POLARITY ENTER
:TRIGger:ESTate:EOR?
Function Queries all settings related to the OR trigger.
Syntax
:TRIGger:ESTate:EOR?
Example
:TRIGGER:ESTATE:EOR? -> :TRIGGER:
ESTATE:EOR:CHANNEL1 DONTCARE;
CHANNEL2 DONTCARE;CHANNEL3 DONTCARE;
CHANNEL4 DONTCARE
:TRIGger:ESTate:EOR:CHANnel<x>
Function Sets the channel polarity of the OR trigger or queries
the current setting.
Syntax
:TRIGger:ESTate:EOR:
CHANnel<x> {DONTcare|ENTer|EXIT|FALL|
RISE}
:TRIGger:ESTate:EOR:CHANnel<x>?
<x> = 1 to 4
Example
:TRIGGER:ESTATE:EOR:CHANNEL1 DONTCARE
:TRIGGER:ESTATE:EOR:CHANNEL1?
-> :TRIGGER:ESTATE:EOR:
CHANNEL1 DONTCARE
Description • This command is valid when
:TRIGger:TYPE
EOR
.
• {ENTer|EXIT} is valid when
:TRIGger:SOURce:
CHANnel<x>:WINDow ON
. For all other cases,
{FALL|RISE} is valid.
:TRIGger:ESTate:POLarity
Function Sets the polarity of the edge/state trigger or queries
the current setting.
Syntax
:TRIGger:ESTate:POLarity {ENTer|EXIT|
FALL|RISE}
:TRIGger:ESTate:POLarity?
Example
:TRIGGER:ESTATE:POLARITY ENTER
:TRIGGER:ESTATE:POLARITY? -> :TRIGGER:
ESTATE:POLARITY ENTER
Description • This command is valid when
:TRIGger:TYPE
EDGE|EQUalify|STATe
.
• This command is invalid when
:TRIGger:TYPE
EDGE and :TRIGger:ESTate:SOURce LINE
.
• {ENTer|EXIT} is valid when
:TRIGger:TYPE
EDGE|EQUalify
and
:TRIGger:SOURce:
CHANnel<x>:WINDow ON
. {FALL|RISE} is valid
when
:TRIGger:TYPE EDGE|EQUalify
and
:
TRIGger:SOURce:CHANnel<x>:WINDow OFF
.
• {ENTer|EXIT} is valid when
:TRIGger:TYPE
STATe
.
:TRIGger:ESTate:SOURce
Function Sets the trigger source of the edge/state trigger or
queries the current setting.
Syntax
:TRIGger:ESTate:SOURce {<NRf>|EXTernal|
LINE}
:TRIGger:ESTate:SOURce?
<NRf> = 1 to 4
Example
:TRIGGER:ESTATE:SOURCE EXTERNAL
:TRIGGER:ESTATE:SOURCE? -> :TRIGGER:
ESTATE:SOURCE EXTERNAL
Description • This command is valid when
:TRIGger:TYPE
EDGE|EQUalify
.
• {<NRf>|EXTernal|LINE} is valid when
:TRIGger:
TYPE EDGE
.
• {<NRf>|EXTernal} is valid when
:TRIGger:TYPE
EQUalify
.
:TRIGger:HOLDoff
Function Sets the hold off time or queries the current setting.
Syntax
:TRIGger:HOLDoff {<Time>}
:TRIGger:HOLDoff?
<Time> = 20 ns to 10 s in 5-ns steps
Example
:TRIGGER:HOLDOFF 1S
:TRIGGER:HOLDOFF?
-> :TRIGGER:HOLDOFF 1.000E+00
:TRIGger:MODE
Function Sets the trigger mode or queries the current setting.
Syntax
:TRIGger:MODE {ALEVel|AUTO|NORMal|
NSINgle|SINGle}
:TRIGger:MODE?
Example
:TRIGGER:MODE ALEVEL
:TRIGGER:MODE? -> :TRIGGER:MODE ALEVEL
:TRIGger:POSition
Function Sets the trigger position or queries the current setting.
Syntax
:TRIGger:POSition {<NRf>}
:TRIGger:POSition?
<NRf> = 0 to 100 (%)
Example
:TRIGGER:POSITION 10
:TRIGGER:POSITION? -> :TRIGGER:
POSITION 10
:TRIGger:SCOunt (Single(N) Count)
Function Sets the number of times the trigger is to be activated
when the trigger mode is Single(N) or queries the
current setting.
Syntax
:TRIGger:SCOunt {<NRf>}
:TRIGger:SCOunt?
<NRf> = See the DL9000 User’
s Manual.
Example
:TRIGGER:SCOUNT 1
:TRIGGER:SCOUNT? -> :TRIGGER:SCOUNT 1
5.29 TRIGger Group