YOKOGAWA DL9040

5-199
IM 701310-17E
Commands
1
2
3
4
5
6
App
Index
:TRIGger:WIDTh:MODE
Function Sets the determination mode of the pulse width
trigger or queries the current setting.
Syntax
:TRIGger:WIDTh:MODE {BETWeen|IN|
NOTBetween|OUT|TIMeout}
:TRIGger:WIDTh:MODE?
Example
:TRIGGER:WIDTH:MODE BETWEEN
:TRIGGER:WIDTH:MODE? -> :TRIGGER:WIDTH:
MODE BETWEEN
:TRIGger:WIDTh:POLarity
Function Sets the polarity of the pulse width trigger or queries
the current setting.
Syntax
:TRIGger:WIDTh:POLarity {FALSe|IN|
NEGative|OUT|POSitive|TRUE}
:TRIGger:WIDTh:POLarity?
Example
:TRIGGER:WIDTH:POLARITY POSITIVE
:TRIGGER:WIDTH:POLARITY? -> :TRIGGER:
WIDTH:POLARITY POSITIVE
Description • {IN|OUT} is valid when
:TRIGger:TYPE
PQUalify|PULSe
and
:TRIGger:SOURce:
CHANnel<x>:WINDow ON
. {HIGH|LOW} is valid
when
:TRIGger:TYPE PQUalify|PULSe
and
:
TRIGger:SOURce:CHANnel<x>:WINDow OFF
.
• {FALSe|TRUE} is valid when
:TRIGger:TYPE
PSTATe
.
:TRIGger:WIDTh:SOURce
Function Sets the trigger source of the pulse width trigger or
queries the current setting.
Syntax
:TRIGger:WIDTh:SOURce {<NRf>|EXTernal}
:TRIGger:WIDTh:SOURce?
<NRf> = 1 to 4
Example
:TRIGGER:WIDTH:SOURCE EXTERNAL
:TRIGGER:WIDTH:SOURCE? -> :TRIGGER:
WIDTH:SOURCE EXTERNAL
Description This command is valid when
:TRIGger:TYPE
PQUalify|PULSe
.
:TRIGger:WIDTh:TIME<x>
Function Sets the pulse width of the pulse width trigger or
queries the current setting.
Syntax
:TRIGger:WIDTh:TIME<x> {<Time>}
:TRIGger:WIDTh:TIME<x>?
<x> = 1 or 2
<T
ime> = 1 ns to 10 s in 500-ps steps
Example
:TRIGGER:WIDTH:TIME1 1S
:TRIGGER:WIDTH:TIME1? -> :TRIGGER:
WIDTH:TIME1 1.000E+00
Description
TIME2 is valid when
:TRIGger:WIDTh:
MODE BETWeen|NOTBetween
.
5.29 TRIGger Group