To Next Page

To Previous Page

5-44

IM 701310-17E

:ANALysis:FFT<x>:HORizontal:LRIGht:

RANGe

Function Sets the range of the horizontal left and right edges

of the FFT computation or queries the current setting.

Syntax

:ANALysis:FFT<x>:HORizontal:LRIGht:

RANGe {<Frequency>,<Frequency>}

:ANALysis:FFT<x>:HORizontal:LRIGht:

RANGe?

<x> = 1 or 2

<Frequency> = 0 to 250 G (Hz)

Example

:ANALYSIS:FFT1:HORIZONTAL:LRIGHT:

RANGE 1HZ,2HZ

:ANALYSIS:FFT1:HORIZONTAL:LRIGHT:RANGE?

-> :ANALYSIS:FFT1:HORIZONTAL:LRIGHT:

RANGE 2.000E+00,1.000E+00

:ANALysis:FFT<x>:HORizontal:MODE

Function Sets the horizontal mode of the FFT computation or

queries the current setting.

Syntax

:ANALysis:FFT<x>:HORizontal:MODE {AUTO|

CSPan|LRIGht}

:ANALysis:FFT<x>:HORizontal:MODE?

<x> = 1 or 2

Example

:ANALYSIS:FFT1:HORIZONTAL:MODE AUTO

:ANALYSIS:FFT1:HORIZONTAL:MODE?

-> :ANALYSIS:FFT1:HORIZONTAL:MODE AUTO

:ANALysis:FFT<x>:IPARt (Imag Part)

Function Sets the source trace of the imaginary part of the FFT

computation or queries the current setting.

Syntax

:ANALysis:FFT<x>:IPARt {<NRf>|DONTcare}

:ANALysis:FFT<x>:IPARt?

<x> = 1 or 2

<NRf> = 1 to 8

Example

:ANALYSIS:FFT1:IPART 1

:ANALYSIS:FFT1:IPART? -> :ANALYSIS:

FFT1:IPART 1

:ANALysis:FFT<x>:LENGth

Function Sets the number of FFT points of the FFT

computation or queries the current setting.

Syntax

:ANALysis:FFT<x>:LENGth {<NRf>}

:ANALysis:FFT<x>:LENGth?

<x> = 1 or 2

<NRf> = 2500, 6250, 12500, 25000, 62500, 125000,

or 250000

Example

:ANALYSIS:FFT1:LENGTH 2500

:ANALYSIS:FFT1:LENGTH? -> :ANALYSIS:

FFT1:LENGTH 2500

:ANALysis:FFT<x>:MAXHold

Function Turns ON/OFF the maximum value hold function of

the FFT computation or queries the current setting.

Syntax

:ANALysis:FFT<x>:MAXHold {<Boolean>}

:ANALysis:FFT<x>:MAXHold?

<x> = 1 or 2

Example

:ANALYSIS:FFT1:MAXHOLD ON

:ANALYSIS:FFT1:MAXHOLD? -> :ANALYSIS:

FFT1:MAXHOLD 1

:ANALysis:FFT<x>:MEASure?

Function Queries all settings related to the automated

measurement of the FFT computation.

Syntax

:ANALysis:FFT<x>:MEASure?

<x> = 1 or 2

Example

:ANALYSIS:FFT1:MEASURE? -> :ANALYSIS:

FFT1:MEASURE:MARKer:BASIC:

DFREQUENCY:STATE 1;