YOKOGAWA DL9040 User Manual

5-48
IM 701310-17E
:ANALysis:FFT<x>:MEASure:MARKer:
CALCulation:VALue<x>?
Function Queries the measured value of the calculation items
of the marker cursor of the FFT computation.
Syntax
:ANALysis:FFT<x>:MEASure:MARKer:
CALCulation:VALue<x>?
<x> of FFT<x> = 1 or 2
<x> of V
ALue<x> = 1 to 4
Example
:ANALYSIS:FFT1:MEASURE:MARKER:
CALCULATION:VALUE1? -> :ANALYSIS:FFT1:
MEASURE:MARKER:CALCULATION:
VALUE1 1.000E+00
:ANALysis:FFT<x>:MEASure:MODE
Function Sets the automated measurement mode of the FFT
computation or queries the current setting.
Syntax
:ANALysis:FFT<x>:MEASure:MODE {MARKer|
OFF|PEAK}
:ANALysis:FFT<x>:MEASure:MODE?
<x> = 1 or 2
Example
:ANALYSIS:FFT1:MEASURE:MODE MARKER
:ANALYSIS:FFT1:MEASURE:MODE?
-> :ANALYSIS:FFT1:MEASURE:MODE MARKER
:ANALysis:FFT<x>:MEASure:PEAK?
Function Queries all settings related to the peak value
measurement of the FFT computation.
Syntax
:ANALysis:FFT<x>:MEASure:PEAK?
<x> = 1 or 2
Example
:ANALYSIS:FFT1:MEASURE:PEAK?
-> :ANALYSIS:FFT1:MEASURE:PEAK:BASIC:
DFREQUENCY:STATE 1;:ANALYSIS:FFT1:
MEASURE:PEAK:BASIC:DV:STATE 1;:
ANALYSIS:FFT1:MEASURE:PEAK:BASIC:
FREQUENCY1:STATE 1;:ANALYSIS:FFT1:
MEASURE:PEAK:BASIC:FREQUENCY2:STATE 1;:
ANALYSIS:FFT1:MEASURE:PEAK:BASIC:
RANGE1 1.000E+00,0.000E+00;
RANGE2 1.000E+00,0.000E+00;V1:STATE 1;:
ANALYSIS:FFT1:MEASURE:PEAK:BASIC:V2:
STATE 1;:ANALYSIS:FFT1:MEASURE:PEAK:
CALCULATION:DEFINE1 "V(P1)";
DEFINE2 "V(P2)";DEFINE3 "V(P1)";
DEFINE4 "V(P2)";STATE1 1;STATE2 1;
STATE3 1;STATE4 1
:ANALysis:FFT<x>:MEASure:PEAK:BASic?
Function Queries all settings related to basic items of the peak
value of the FFT computation.
Syntax
:ANALysis:FFT<x>:MEASure:PEAK:BASic?
<x> = 1 or 2
Example
:ANALYSIS:FFT1:MEASURE:PEAK:BASIC?
-> :ANALYSIS:FFT1:MEASURE:PEAK:BASIC:
DFREQUENCY:STATE 1;:ANALYSIS:FFT1:
MEASURE:PEAK:BASIC:DV:STATE 1;:
ANALYSIS:FFT1:MEASURE:PEAK:BASIC:
FREQUENCY1:STATE 1;:ANALYSIS:FFT1:
MEASURE:PEAK:BASIC:FREQUENCY2:
STATE 1;:ANALYSIS:FFT1:MEASURE:PEAK:
BASIC:RANGE1 1.000E+00,0.000E+00;
RANGE2 1.000E+00,0.000E+00;V1:
STATE 1;:ANALYSIS:FFT1:MEASURE:PEAK:
BASIC:V2:STATE 1
:ANALysis:FFT<x>:MEASure:PEAK[:BASic]:
ALL
Function Turns ON/OFF all basic items of the peak value of the
FFT computation.
Syntax
:ANALysis:FFT<x>:MEASure:
PEAK[:BASic]:ALL {<Boolean>}
<x> = 1 or 2
Example
:ANALYSIS:FFT1:MEASURE:PEAK:BASIC:
ALL ON
:ANALysis:FFT<x>:MEASure:PEAK[:BASic]:
DFRequency?
Function Queries all settings related to the frequency value
between peak values of the FFT computation.
Syntax
:ANALysis:FFT<x>:MEASure:PEAK[:BASic]:
DFRequency?
<x> = 1 or 2
Example
:ANALYSIS:FFT1:MEASURE:PEAK:BASIC:
DFREQUENCY? -> :ANALYSIS:FFT1:MEASURE:
PEAK:BASIC:DFREQUENCY:STATE 1
5.3 ANALysis Group

YOKOGAWA DL9040 Specifications

General

Brand	YOKOGAWA
Model	DL9040
Category	Test Equipment
Language	English